Nogen der lige kan hjælpe med bios instillinger i EXTREAM TWEAKER MENYEN..
Har lige bestilt ny blæser så mit varme problem skulle blive løst snarest :=)
Jeg har følgende hardware:
Asus maximus Formula bundkort
Intel E8500 (3,16 Mhz cpu)
4GB Kingston pc2-8500 ram (1066 mhz)
Dette er mine indstillinger lige nu nogen der har nogle rettelser eller gode forslag til hvad jeg skal ændre ..
CPU Feature
Ai Overclock Tuner [Manual]
CPU Ratio Control [Manual]
Ratio CMOS Setting: [8]
FSB Frequency [400]
FSB Strap to North Bridge [Auto]
PCIE Frequency [110]
DRAM Settings
DRAM Frequency [Auto]
DRAM Command Rate [2T]
DRAM Timing Control [Manual]
CAS# Latency [5]
RAS# to CAS Delay [5]
RAS# Precharge [5]
RAS# Active Time [12]
RAS# To Ras# Delay [3]
Row Refresh Cycle Time [42]
Write Recovery Time [6]
Read To Precharge Time [3]
Read To Write Delay(S/D) [8]
Write To Read Delay(S) [3]
Write To Read Delay(D) [5]
Read To Read Delay(S) [4]
Read To Read Delay(D) [6]
Write To Write Delay(S) [4]
Write To Write Delay(D) [6]
DRAM Static Read Control [Disabled]
Ai Clock Twister [Strong]
Transaction Booster [Enabled]
Boost Level [0]
Voltage Settings
CPU Voltage 1.2500
CPU PLL Voltage [Auto]
North Bridge Voltage [1.45v]
DRAM Voltage [2.2v]
FSB Termination Voltage [1.34v]
South Bridge Voltage [Auto]
Loadline Calibration [Enabled]
CPU GTL Reference [0.63x]
North Bridge GTL Reference [0.67x]
DDR2 Channel A REF Voltage [Auto]
DDR2 Channel B REF Voltage [Auto]
DDR2 Controller REF Voltage [Auto]
SB 1.5V Voltage [Auto]