g73 skuffer i 3d mark 11

http://support.amd.com/us/gpud…es/radeonmob_win7-64.aspx, hvis du har 64-bit?
Ellers prøv at reset alle indstillinger inde i CCC til default, og se om det hjælper.

/edit
Fra 3DMarks hjemmeside

Quote

Unable to verify AMD Catalyst tessellation setting, result invalid

This message can appear only with 3DMark 11 results from systems using ATI/AMD video cards. It appears when the benchmark run was done with too old SystemInfo module and there is no way to verify if AMD Catalyst Tessellation Controls were modified for the benchmark run. Most likely the result is comparable with other scores, but there is unfortunately no way to tell.

This error should appear only with old benchmark results submitted prior to the introduction of Futuremark SystemInfo 4.2. To correct the problem, update SystemInfo module to the latest available and re-run benchmark. Latest SystemInfo installer can be found here.

Altså hente den seneste SystemInfo - http://www.3dmark.com/support/systeminfo-updates/

Papis læs nu lige hvad der står inden du spørger mig

Quote

Your result has the following problem(s) and will not be shown for example on leaderboards:
Graphics driver is not approved (What is this?)

Så klikker du på What is this? - http://www.3dmark.com/support/…ation.driver.not.approved

Quote

Graphics driver is not approved

This message is displayed if your benchmark result was obtained using a set of graphics card drivers that are not (yet) approved by Futuremark.

In order to ensure that drivers do not breach our Driver Approval Policy, Futuremark tests video drivers and validates the results. Drivers are sent for testing and approval as soon as they are published but this process takes some time – usually between one and two weeks. Any results uploaded during this time initially shows as “not approved” but will turn to approved results when the driver approval process is complete for the specific driver version – you do not need to do anything, your result will transform into approved result in time.

Results obtained using beta, “hotfix” or otherwise non-WHQL drivers will also show this message and normally non-WHQL drivers are not approved for use with our benchmarks unless specifically requested by the graphics card vendor.

If there are no WHQL certified drivers yet for your video card/chip – usually if you buy your hardware right after they become available – you will have to wait until the first WHQL approved drivers with support for your card are made available for valid results. You can benchmark even with beta drivers – the results just won’t be certified as valid and the result page will show that the drivers are not approved.

More information on driver approval and currently approved drivers

Display More

Så klikker du på More information on driver approval and currently approved drivers - http://www.3dmark.com/approved-drivers/

Quote

3DMark 11

AMD/ATI

Radeon HD 6000 and Radeon HD 5000 series:

Catalyst 11.9 (8.892.0.0)

Display More

Svar nok?

/edit
Hvordan du får højere score?

Google.

Men ellers hvis du virkelig vil prøve:
Højreklik på 3DMark 11 processen (inden du er inde i bench, ellers lukker den) og sæt prioritet til høj.
Fjern alle kørende processer der ikke bliver brugt til noget vigtigt.
Tag nettet?
Gå ind i strømstyring, avanceret, og sæt alt på 100% når den oplader.
Sørg for at blæserne får noget koldt luft.
Er der noget turbo mode på den G73, eller nem OC der følger med?
Stop tjenester der ikke bliver brugt.
Deaktiver alt Windows udseende gejl, kør der klassiske theme.

Og så videre

Det er driveren der er for ny, du skal have 11.9 hvis den skal "bestå", da 11.10 er for ny.
Der er ikke rigtigt nogen grund til at downgrade til den ældre verrsion da det kun giver dig dårligere performance i BF3